Solution for error 0x80780119 when creating system image on Windows 7

Error message (text copied from another site, I was too lazy to type it all out ;).. hence some spelling errors left :

“There is not enough disk space to create the volume shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for volumes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)”

I’ve had it occur after restoring from a system image, apparently it will happen if System Reserved partition has less than about 40% free.

Assign a drive letter, in this example “F:”, to System Reserved partition in Disk Management.
Run following in elevated command prompt :
fsutil usn deletejournal /d /n F:
Remove drive letter after this.

Xymon install on Debian 7

Install Debian (Should work fine on any recent Debian based OS, 32 or 64 bit)
Include web server role

Get latest Xymon, currently 4.3.10 http://sourceforge.net/projects/xymon/

wget http://downloads.sourceforge.net/project/xymon/Xymon/4.3.10/xymon-4.3.10.tar.gz
apt-get install linux-headers-$(uname -r) build-essential libssl-dev fping librrd-dev libldap2-dev
useradd xymon
tar xvfz xymon-4.3.10.tar.gz
cd xymon-4.3.10
./configure.server
make && make install

mdadm / lvm misc commands

mdadm –create /dev/md3 –level=raid6 –chunk=256 –raid-devices=5 /dev/sd[cdghi]2 <- create raid6 mdadm --readwrite /dev/md3 <- start resync pvcreate /dev/md3 <- create physical lvm group vgcreate raid6 /dev/md3 <- create volume group raid6 on device /dev/md3 lvcreate -n storage -l 100%FREE raid6 <- create logical volume on raid6 volume group mkfs.ext4 -m 0 /dev/raid6/storage <- ext4 fs with 0% reserved root space mdadm --add /dev/md3 /dev/sde5 /dev/sdb5 <- add more drives to /dev/md3 mdadm --grow /dev/md3 --size=max lvextend -l 100%PVS /dev/raid6/storage <- extend the logical volume resize2fs /dev/raid6/storage <- extend fs